Not sure which curing machine fits your lab?
PRODEX™ & TRAYDEX™ LED CURING MACHINES
Five curing machines.
One right fit for your lab.
From a compact 35 W one‑touch unit to a 300 W touchscreen flagship with bottom light, pre‑heat and nitrogen pre‑gas — compare the range for 3D‑print post‑curing and find the model that matches your workflow.
FIND YOUR MACHINE
Start with what you cure, not with the spec sheet
Every model uses stable, high‑power LEDs instead of UV fluorescent tubes, a 5‑second‑step timer and a door that pauses curing when opened. What changes is power, wavelength, control and the extras — nitrogen, bottom light and pre‑heat.
Compact, one‑touch
TRAYDEX 18
The smallest unit in the range: set the time with up / down, press start — and it remembers the last time you used.
35 W
Rated power
- 10 LEDs · 375–470 nm, peaks 385 / 405 / 460 nm
- Curing time 5–995 s in 5 s steps
- Chamber L176 × W126 × H83 mm
- 2.2 kg · L195 × W210 × H140 mm
Adjustable IDT curing
TRAYDEX 45
Set Intensity, Duty cycle and Timer separately to match each material, and save your setting as the power‑on default.
75 W
Rated power
- 25 LEDs · 375–470 nm, peaks 385 / 405 / 460 nm
- 16 intensity levels · duty cycle 10–100 %
- 5–995 s · 1 memory setting
- Chamber L140 × W140 × H83 mm · 3.1 kg
Nitrogen atmosphere
PRODEX N2
UVA LEDs for 3D‑printed resin, plus a nitrogen purge that reduces oxygen in the chamber during curing.
75 W
Rated power
- 25 LEDs · 355–415 nm, peaks 365 / 385 / 405 nm
- N₂ push‑in fitting for Ø6 mm (1/4") hose
- IDT settings + 3 memory programs
- Chamber L140 × W140 × H83 mm · 3.6 kg
720° full light curing
PRODEX BL
Adds a bottom light under the tray, so parts cure from above and below in one cycle.
100 W
Rated power
- 35 LEDs · 355–415 nm, peaks 365 / 385 / 405 nm
- Top and bottom light
- IDT settings + 3 memory programs
- Chamber L140 × W140 × H83 mm · 3.4 kg
New · touchscreen flagship
PRODEX 53
Touchscreen with material and brand curing libraries, top and bottom light, pre‑heat to 80 °C and nitrogen pre‑gas.
300 W
Rated power
- 25 upper + 25 bottom LEDs · 355–415 nm
- Intensity 20–100 % · flash mode · heat 40–80 °C
- Nitrogen curing and pre‑gas, 3–6 LPM
- 100 saved profiles · up to 59 min 59 s · 9.3 kg
COMPARE
All five curing machines, side by side
Power, LEDs, wavelength, chamber size and every function in one table. On a phone, swipe the table sideways to see all models.
TRAYDEX 18
TRAYDEX 45
PRODEX N2
PRODEX BL
PRODEX 53
Best for
Compact everyday curing
Adjustable IDT curing
Nitrogen atmosphere
720° top + bottom curing
Touchscreen flagship
Rated power
35 W
75 W
75 W
100 W
300 W
Power input
100–240 Vac
50–60 Hz
100–240 Vac
50–60 Hz
100–240 Vac
50–60 Hz
100–240 Vac
50–60 Hz
100–240 Vac
50–60 Hz
Fuse
1 A
2 A
2 A
3 A
4 A
Number of LEDs
10
25
25
35
50
(25 top + 25 bottom)
LED wavelength
375–470 nm
Peaks 385 / 405 / 460 nm
375–470 nm
Peaks 385 / 405 / 460 nm
355–415 nm
Peaks 365 / 385 / 405 nm
355–415 nm
Peaks 365 / 385 / 405 nm
355–415 nm
Peaks 365 / 385 / 405 nm
Curing time
5–995 s
5–995 s
5–995 s
5–995 s
1 s – 59 min 59 s
Memory
Last setting
1
3
3
100
Dimensions (max)
L195 × W210 × H140 mm
L200 × W220 × H160 mm
L200 × W220 × H160 mm
L200 × W220 × H160 mm
L200 × W335 × H260 mm
Chamber (max)
L176 × W126 × H83 mm
L140 × W140 × H83 mm
L140 × W140 × H83 mm
L140 × W140 × H83 mm
L140 × W140 × H76 mm
Weight
2.2 kg
3.1 kg
3.6 kg
3.4 kg
9.3 kg
Functions
Adjustable intensity
–
✓
✓
✓
✓
Duty cycle
–
✓
✓
✓
✓
Nitrogen compatible
–
–
✓
–
✓
Bottom light
–
–
–
✓
✓
Pre‑heat
–
–
–
–
✓
Nitrogen pre‑gas
–
–
–
–
✓
Specifications from the DENTMATE LED curing machine catalogue. For laboratory and professional use only. Specifications subject to change.
IN EVERY PRODEX AND TRAYDEX
Built the same way, whichever model you choose
LEDs, not UV tubes
Stable, high‑power LEDs on a constant‑current circuit avoid the cost and hassle of replacing UV fluorescent tubes.
Fast broadband curing
Multi‑peak LEDs across the UVA and visible range give a quick, uniform cure and save fabricating time.
Post‑curing for 3D printing
Every model is designed to post‑cure 3D‑printed resin parts, from a single splint to a full build plate of models.
Pause by opening the door
Opening the door pauses curing, and the light will not start while the door is open — adjust the time and press start to resume.
Frequently asked questions
Which wavelength suits my resin?
PRODEX N2, PRODEX BL and PRODEX 53 use 355–415 nm UVA LEDs with peaks at 365, 385 and 405 nm. TRAYDEX 18 and TRAYDEX 45 cover 375–470 nm with peaks at 385, 405 and 460 nm. Check your resin's instructions for its recommended curing wavelength.
How do I connect nitrogen?
PRODEX N2 has a rear N₂ push‑in fitting for an Ø6 mm (1/4") hose; press the N₂ button to purge. On PRODEX 53, connect nitrogen to the rear port — 3 LPM is recommended for nitrogen curing, and pre‑gas can be set to 3, 4, 5 or 6 LPM. Always use a flowmeter and keep the low‑side pressure below 30 psi.
What do the IDT settings do?
IDT stands for Intensity, Duty cycle and Timer. Intensity runs from level 1 to 16 — for flat or thin parts, use a lower level with a longer time. Duty cycle runs from 10 % to 100 % — lower it for small or thin parts to reduce shrinkage deformation. The timer runs from 5 to 995 s in 5 s steps.
The display does not light up. What should I check?
The fuse has most likely blown. Switch off and unplug the unit, let it cool down, then open the fuse holder in the power socket with a flat‑head screwdriver and fit the spare fuse stored at the bottom of the holder. If the LEDs do not light after pressing start, make sure the door is fully closed. If “Er1” (overheat) appears, turn the unit off and contact your distributor.
How do I clean the curing chamber?
Unplug the unit first. Wipe the chamber with a soft cloth dampened with alcohol and remove any resin before the next cycle. Do not use organic solvents such as benzene or thinner.
What does the warranty cover?
Each machine is warranted against manufacturing defects for one year from the invoice date. Damage from drops or impact, natural disasters, incorrect voltage or power surges, and any modification or disassembly are not covered.
